Cisco CCNA Routing and Switching (200-125)
- Networking basics and Protocols working principles
- Networking models – OSI and TCP/IP or Dod models
- Network implementation
- Network topologies
- Types and implementation of communication network
- Structure and implementation of IPv4 and IPv6
- IPv4 and IPv6 addressing, summarization, VLSM and subnetting
- IP Routing technology
- Setting Initial Router
- Static and Dynamic routing
- Dynamic routing protocols
- Setting and controlling Routing protocol
- IP routing table analysis
- RIPv2 and RIPng Protocols
- Operating mechanism
- Setting and Control
- Trouble shooting
- Setting LAB – RIPv2 and RIPng
- EIGRPv4 and EIGRPv6 Protocols
- Operating mechanism
- Setting and Control
- Trouble shooting
- Setting LAB – EIGRPv4 and EIGRPv6 and analysis
- OSPFv2 and OSPFv3 Protocols
- Operating mechanism
- Setting and Control
- Trouble shooting
- Setting LAB – OSPFv2 and OSPFv3 and analysis
- Inter-vlan Routing
- Operating mechanism
- Setting and Control
- Router on a stick, SVI
- Setting LAB – Inter-vlan Routing and analysis
- LAN Switching technology
- Layer 2 switching, MLS switch and its operating mechanism
- MAC addressing, learning, aging and table
- Frame switching and flooding
- VLAN, it types, setting VLAN and control
- Switch port types, access and trunk port
- VTP, DTP and IEEE 802.1Q protocols
- STP protocols (PVST+, RPVST+ and MSTP)
- Layer 2 protocols – CDP and LLDP
- Etherchannel technology and setting (Static, PAGP and LACP)
- LAB – Vlan,VTP, Trunking, STP and setting Etherchannel and analysis
- WAN technologies
- Wan technology working principle
- Wan topologies (Point-to-point, Mesh, Hub and Spoke)
- MPLS, PPP, Metro Ethernet, Broadband PPPoE technologies
- Internet VPN (DMVPN, Site-to-Site and Remote access VPN)
- BGP, its initial setting, and control
- QoS
- LAB – GRE and setting IPv4 BGP and analysis of IPv4 BGP
- Infrastructure services
- Setting DHCP and analysis
- Setting HSRP and analysis
- Setting IP NAT/PAT and analysis
- Setting NTP and analysis
- LAB – HSRP and setting NAT/PAT
- Infrastructure security and solutions
- Security and security tools
- Layer 2 setting Switch port security and control
- Layer 2 attack types and prevention mechanisms (802.1X, DHCP Snooping and non-default Native VLAN)
- IPv4/IPv6 ACL, setting IPv4/IPv6 ACL and control
- Setting IOS security in networking tools (Local authentication, Secure passwords, TELNET / SSH and AAA RADİUS and TACACS+)
- LAB – Switch port security and setting IP ACL and analysis
- Infrastructure management
- Equipment monitoring (SNMPv2/v3 and SysLog)
- Setting ICMP based IP SLA and control
- Performing Backup and Restore operations
- License, License installation and control
- IOS upgrade and recovery
- Password recovery and changing configuration register file settings
- IOS testing tools (ICMP Ping, traceroute)
- Terminal monitor
EventLog Analyzer
- Setting LAB – IP SLA and password recovery control
